Installing the DSI T-Thread Adapter Plate

Subscribe to Syndicate

Got around to mating the plate to the DSI today. I was concerned with unscrewing the four phillips screws that secure the Meade filter bar holder.  The screws are very small and I didn't have a phillips head screwdriver of that size.  So I used a small slot head screwdriver.  Scopestuff supplies 4 phillips head screws and washers (plus one extra set) to secure the plate to the DSI. These screws had larger heads and I was able to use a "0" phillips screwdriver.

With the plate secured, I was able to thread the DSI into a Meade variable projection camera adapter, and then insert that into the VSI POI in the Sidewinder side port.